Beiträge von MCMXLIVer

    Servus .......... nicht nur die FX


    Frage (in "oversea"): Is version 4.5 going to run properly in Vista?


    Antwort in (in "oversea"):
    No, not officially. Certain components within EDIUS simply are not designed to work under Vista (namely ProCoder Express and Xplode for EDIUS).
    __________________
    Kenneally Harder
    Grass Valley San Jose
    http://ediusforum.grassvalley.…ighlight=vista+pce&page=4



    andere Antwort auf andere Frage (in "oversea"):
    Sort of - the DVRex RT is definitely no longer supported,
    and I would wager [= wetten] that v4.xx will be the last major release for official DVStorm support.
    __________________
    Kenneally Harder
    Grass Valley San Jose
    http://ediusforum.grassvalley.…t=148&highlight=storm+bet


    freundliche Grüße vom ViennaLowLevelService ........... old Hans


    [edit]
    uppps.... die Jugend in "direkt Wien" war wieder mal schneller ...... :huhu:
    [/edit]

    Sevus @ all, .......Hochachtungsvoll ....speziell an GV....


    Bitte um Gotteswillen nicht den aus guten, bewährten Gründen eingeführtenNLE- Industriestandard "Clipmarker"
    (vulgo "Locators" ....... von genau dort dort kommt er nämlich...)


    mit irgendwelchen mal so mal so mitwandernden DVD \ Timeline Markern verwässern, vermischen, vermantschkern.........


    Die echte Funktion "Clipmarker" ist in den Clip eingebrannt (solange ich den Marker nicht lösche..... )
    Die Funktion "Clipmarker" (vulgo "Locators") ist eine Basisfunktion in jener NLE-Kategorie wo GV-Edius gottseidank nun hingeht
    (Nicht unbedingt dort, von wo Canopus-Edius herkommt.......)


    Die echte Funktion "Clipmarker" bleibt auch für ein anderes Projekt erhalten......


    Wenn der Clip bei Frame 00:12:43:16 einen Audiodefekt hat,
    der das Rohmaterial sichtende Editor deswegen einen "Clipmarker" genau auf dieses Frame drauf setzt
    hat dies immer nur mit genau diesem Frame im genau diesem Clipz u tun,
    nie etwas mit der Timeline oder DVD Marker Spielereien zu tun.......



    Absolut (nach meiner persönlichen Ansicht) auf den Punkt gebracht:



    yuuupppp, doch noch gefunden, das alte Zeug....habe ich mal vor ewigen Zeiten fürs .com forum gemacht....


    wenn der CTI auf das entsprechende Frame kommt, wird der Markertext autmatisch im Monitor eingeblendet....
    (lässt sich natürlich auch abschalten...)


    [Blockierte Grafik: http://members.aon.at/vienna1944er/locator2.jpg]


    [Blockierte Grafik: http://members.aon.at/vienna1944er/locator.jpg]


    freundliche Grüße vom ViennaLowLevelService ........... old Hans :huhu:

    ergänzend zu "Timo" : click mich => absolut genau das Gleiche wie "im windoof-corner"


    die Vorteile die ich allerdings sehe:


    das OS und seine Applikationen sind wesentlich schlanker (was auf eine gewisse Effizienz schließen lässt)


    [Blockierte Grafik: http://666kb.com/i/apjmj3i3j76ycfvja.jpg]


    da keine breit gestreute Hardware möglich ist, kommen alle "current limitations" schneller \ genauer ans Tageslicht.


    da der Userkreis eher geschlossen \ homogen agiert ...
    kommen die genauso notwendigen "workarounds" schneller \ genauer auf
    werden die genauso notwendigen "workarounds" schneller \ genauer publiziert.

    Zitat

    Nein, hier sollte man nach wie vor auf Imaginate zurückgreifen


    sorry, tut leid, aber sogar bei uns (in Wien, relativ nahe dem geaschäftstüchtigem Balkan) würde man eher erwarten:


    zurückgreifen ......wenn zurückgreifen bedeutet, wenn Imaginate sowieso schon vorhanden ist.
    [nur für diese Leute stellt die Frage nach anim. Layouter eigentlich nicht wirklich dringend]


    Wer aber dazu noch schnell Imaginate kaufen sollte \ müsste (solange es Imaginate überhaupt noch giebt)
    hätte sich auch in deutschen Landen den einschränkenden Hinweis verdient:


    Beachten Sie vor ihrer Investition bitte: Die Imaginate Entwicklung hat aber schon aufgehört.


    Quelle: (ist nur einer von etlichen offiziellen Hinweisen aus "oversea")


    Zitat

    Imaginate development has ceased.
    [ Imaginate Entwicklung hat aufgehört. ]
    __________________
    Kenneally Harder
    Grass Valley San Jose


    freundliche Grüße vom ViennaLowLevelService ........... old Hans

    Zitat

    Man kann es natürlich mit zwei unterschiedlichen Festplatten erreichen


    ich weiß, es ist nur unglücklich formuliert........... aber der Vollständigkeit halber


    a) Man kann es natürlich mit zwei unterschiedlichen Festplatten erreichen


    b) Man kann es natürlich auch auf einer (derselben) Festplatte erreichen,
    diese muß nur zwei primäre Partitionen aufweisen, mit jeweils einem OS.......


    Variante "b)" [alias "dualboot"] ....sollte eigentlich zum Standardsetup eines NLE Rechners gehören.
    Gleichgültig welche Applikation darauf ausgeführt wird.... Edius Adobe, Avid etc. etc.


    Updates \ Upgrades \ neue Grafiktreiber \ neue Maustreiber \ neue PugIns \ Windoof Patches etc. testet man(n) nicht am "running system"


    egal ob es um €uronen in Form von "verlorenen Mannstunden" im produktivem Bereich geht
    oder nur um die Nerven und Frust im rein privaten Bereich.


    und nochmals....... egal ob Edius Adobe, Avid etc. etc. ..alle kochen nur mit Wasser.......


    freundliche Grüße vom ViennaLowLevelService ........... old Hans :huhu:


    PS: Methode "a)" und dann mit verschiedenen Wechselfestplatten per der Schublade ist die effektivste Nervenschonmethode... (für mich)

    soweit ich mich erinnere:


    die (1394er) Probleme lagen meist unter folgenden Voraussetzungen ( Installationsreihenfolge) vor:


    1) XP + SP1 und NLE's bereits installiert
    2) und dann nachträglich über alles SP2 drübergebügelt.


    selten 1394er Probleme mit Installationsreihenfolge:
    1) XP + SP1 und => mit SP2 das OS komplettiert
    2) dann erst NLE's installiert.


    freundliche Grüße vom ViennaLowLevelService ........... old Hans :huhu:

    Achtung, nur ein Versuch ein benötigtes .xls hochzuladen,
    welches mir im Ami-forum (scheints aus Zensur-Freigabe Modalitäten) nicht gelingt...




    Zitat

    for english guests:


    please rename the file "shortcuts 3.5 for web .txt " to "shortcuts 3.5 for web .xls"


    friendly greetings from ViennaLowLevelService ........... old Hans

    .... drübergestolpert........ :schal:


    click hier >> für übersetzte Infos über (jap.) Edius 4.5


    ■AVCHD
    Import of AVCHD native file
    Without using Canopus AVCHD Converter the AVCHD file of Panasonic, Sony and Canon can be imported


    ■Panasonic
    DVCPRO HD 720 59.94p/23.98p over 59.94p
    [kiyapuchiya]/it is output enable by way of HD-SDI/RS-422A. * P2 Option is necessary.
    Import of P2 AVC-Intra file
    The image of AJ-HPX2100 and the like becomes compilation possible.
    * P2 Option and AVC-Intra Option are necessary.
    Import of AVCHD native file
    Without using Canopus AVCHD Converter the AVCHD file can be imported.


    ■SONY
    HDV 108,024 p/25p/30p
    It corresponded to HVR-V1J and HVR-DR60 which are optimum to the digital cinema. With HVR-DR60, import/direct compilation is possible the file which is cut off in the middle of GOP by the restriction of file size as 1 clips. (During patent applying)

    ■JVC
    HDV 720 59.94p/50p
    It corresponded to the HDV format of JVC entirely.

    ■Grass Valley
    JPEG2000
    It corresponded to reading the JPEG2000 type which with the digital media cam coda “Infinity” of Grass Valley has been adopted. * Standard it is loaded in the turn key system.


    The cooperation with DAW/After Effects with AAF


    AAF (Advanced Authoring Format) it corresponded to import/export. With the composition software of DAW and After Effects etc of Pro Tools and the like exchanging the data becomes possible


    Accelerating HDV/MPEG output


    Compilation operation only the place where it does is encoded corresponded to “segmented encoding”. In order to be sufficient for encoding processing of the necessary minimum, XDCAM * 1, HDV * 2, it is possible to accelerate the output of MPEG2.
    * 1 XDCAM Option are necessary. Only 108,060 i/50i format segmented encoding possibility. 24p/25p/30p becomes full encoding.
    * All format of 2 JVC, Sony/Canon 24p is not yet correspondence


    Menu attaching DVD compilation function


    Added “Canopus DVD Creator” to the x porter of EDIUS. Until now, it was possible directly to draw up DVD from the time line, but from version 4.5 it reached the point where it can draw up DVD of the menu attaching. Following to wizard, it just operates simply be able to draw up, also the various templets are beforehand prepared. Not only PCM also AC3 is selection possible in sound.


    * Number of installed capacity of AC3 channels depends on project setting. In addition, the license of Dolby Digital is limited to private use. You cannot use in commercial business.


    Adding user profile performance


    It reached the point where the setting and window layout of EDIUS can be changed every user. (Hardware setting [ehuekutopurisetsuto] is excluded)
    It calls the compilation environment where is suited for the respective editor instantaneously even with the environment where the group of editors operate one system and/it is possible to change.


    It corresponds to the other companies make controller


    It corresponded to the controller “MKB-88” for the video compilation software of Musashi corporation make. It moves to nonlinear compilation linear like with the controller which has the operativity of Jog/Shuttle, smoothly, it does the fact that high productivity is shown.


    In addition, it corresponded to also Behringer corporation make fader controller “BCF2000


    It corresponds to other companies make [terotsupa]


    It corresponded to [terotsupa] “VZ50” for EDIUS of the freon TEX corporation make. * Frontec Option is necessary.
    In addition, the data of the canvas corporation make SST series lining up the option “SST Option” which is made enabled anew. At the broadcasting station and the like the work flow whose efficiency is good at the time of using, can be actualized.


    ■Canopus Video Out Plug-ins belongs usually
    Former Adobe Photoshop, After Effects and NewTek Lightwave3D (ver.9) adding,
    It corresponded to ●Autodesk Maya 7 ●Autodesk 3ds max 8 ●Autodesk Combustion 4 ●Bauhaus Software Mirage 1.5a usually. Real time video output from these software becomes possible.
    * This corporation make hardware whose video output is possible is necessary


    It corresponds to [kiyapuchiya] with of ■DirectShow Device
    Using the hardware which corresponds to DirectShow, with EDIUS [kiyapuchiya] it becomes possible to do. Being able to connect DirectShow Device other than Canopus, make Takasina rank with Canopus HQ Codec [kiyapuchiya] it does and it is possible to compile.
    * It is not something which guarantees that it corresponds to all DirectShow Device.



    you wish a info from japan >> call europe\austria\vienna .... old Hans :huhu:

    hi


    wie kommst du auf die Variante neuer Dongle... ???


    4.5 ist nach meinen Wissen als kostenlos innerhalb der 4.xx Version angekündigt.


    i.e Edius Pro 4.xx zu Edius Pro 4.5


    ditto Edius Pro 4Broadcast zu Edius Pro Broadcast 4.5


    solange es kein Upgrade von 4.xx auf 5.xx ist, stellt sich imhho die Frage überhaupt nicht.


    z.B.: Avid-= wenn kostenpflichter Versionssprung ergo Upgrade
    bekommst du auch eine Dongle-Upgrad.exe zugeschickt......


    Da hätten die viel zu tun, wenn jeder seinen Dongle einschicken würde.....
    Einschicken ist meistens nur, wenn mit der "dongle_upgrade.exe " was schiefgelaufen ist
    und du Dies bei deinem lokalen Reseller auch ernsthaft glaubhaft machern kannst......


    @ spirits.......freundlicher Einspruch ........falls ich "bkdo63 " richtig verstanden habe


    >Im Kopffeld 1VA das Videosymbol "V" aktivieren.
    a) er will überhaupt keine V/A Spur .... nur A und V wäre sein Wunsch

    >Sie sind aber noch als Gruppe gekoppelt . Jetzt Rechtsklick auf Ton oder Video und mit "Gruppe entfernen" ... Gruppe auflösen.

    b) er wünscht eine Gruppenbildung des Videoteils mit dem Audioteil des Quellclips
    nur mit dieser Gruppenbildung ist ein Verschieben des Clips [ A+V sychron ] .....z.B. mit Maus etc. möglich
    [ohne Versatz zwischen Ton und Bildteil des Clips]


    c) das [sein] Problem ist :
    wenn alle Clips einer Sur per "Kontex" auf die Spur und "Auswählen" >> Ausgewählte Spur" verschoben werden
    erolgt (automatisch) eine Auflösung der Gruppierung... und es kommt zum Tonversatz.....


    da hilft (leider) nixe dagegen ..... Edius ist andersherum gestrickt.......


    Quellen:
    1) selbst erworben, per try an error......
    2) spärlich im Handbuch vereinzelt zu finden



    Zitat

    2.2 ) Behandeln mehrerer Videoclips alsein Clip
    Festlegen von Gruppen ? S. 248
    Sie können mehrere Clips als Gruppe zusammenfassen. Die Gruppe kann Clips auf verschiedenen
    Spuren beinhalten.
    Entfernen der Gruppierung ? S. 248
    Sie können gruppierte Clips wieder in die ursprünglichen einzelnen Clips aufteilen.


    [edit]


    fall sich jemand fragt, ...warum nur warum denn, will er, (und nicht nur er)
    unbedingt pure Videospuren, getrennt von puren Audiospuren haben???


    Ich kann ihn verstehen, das ist nun mal zu Recht anerkannter \ begründeter Industrie-Standard


    erschwerend kommt nochdazu, das Edius auch in 4.24 bei in V/A Spuren noch immer nicht die Größe der Audiodarstellung getrennt von der Videodarstellung scalieren kann....


    dies bedeutet:
    wenn wegen Audioarbeit die Spurhöhen groß gewählt werden müssen,
    liegen die leider ebenfalls automatisch vergrösserten Videoteile dann genau ( und störend) zwischen den einzelnen [zu bearbeitenden] Audioteilen.....
    und pappen den Bildschirm von oben bis unten unötig voll...... Video Infoemation liegt sowieso am Vorschaumonitor an......


    [/edit]



    freundliche Grüße vom ViennaLowLevelService ........... old Hans :huhu:

    bin kein Experte, aber ich glaube du suchts "channel-mapping"


    habe mal als Test die V/A Spuren gelöscht,
    per channel-mapping" = 1 A für Stereo 1,2 gewählt ... und V/A clip eingefügt in timeline...
    channel-mapping" = Mausclick auf das kleine A im Spurkopf und dann auswählen..... siehe Sreenshot...



    [Blockierte Grafik: http://666kb.com/i/aoq8l68me4etnp206.jpg]



    1V + 1 A sind automatisch gruppiert... werden gemeinsam verschoben getrimmt, was auch immer
    für einzelnes bearbeiten/ trimmen von nur Audio ist eine Gruppierung zu lösen


    fügst du die gleiche V/A Quelle ... in eine V/A Sur ein ..... so sind diese verknüpft...... werden gemeinsam verschoben getrimmt, was auch immer
    für einzelnes bearbeiten/ trimmen von nur Audio ist eine Verknüpfung zu lösen


    warum das auch immer so sein muß.....mal veknüpft, mal gruppiert.... logisch erschein es mir nicht .... aber bin halt schon "altes Mann"....


    freundliche Grüße vom ViennaLowLevelService ........... old Hans :huhu:

    Servus


    okay, war zu schnell schnell geschrieben...... Versuch 2


    wer hat mit 4.24 schon seine HQ [HDV] timeline über
    den vorgesehenen Weg = >> m2t >> TS-Writer
    zurück aufs Band gebracht???


    @ Christian
    ich meinte schon den "normalen" Ablauf.....(schrieb es aber zu ungenau)


    T-Bone hatte es ja drüben vorher auch schon korrekt aufgelistet:
    to first create an .m2t file using print to file, and then fire up Capture\mpeg TS writer to write that file to the HC1:

    Frage:


    wer hat mit 4.24 schon seine HQ [HDV] timeline zurück aufs Band gebracht???


    wenn ja, bitte welche Cam ..... welcher Weg.......
    wenn nein, bitte auch kurze Meldung........


    Danke ... [Blockierte Grafik: http://www.videotreffpunkt.com//images/smilies/60.gif]


    "oversea" giebt es eventuell scheints Schwierigkeiten damit ....


    http://ediusforum.grassvalley.com/forum/showthread.php?t=587
    in edius, print to tape (with or without timecode):
    immediate error message: An error has occurred during tape out


    as you say, edius sends the signals to the HC1 to take the HC1 off of pause and start recording, but after a second or 2 it says:
    Invalid Input Signal
    and even if I let it keep recording, there is nothing on the tape


    so there's your confirmation (unless we're both doing the same thing wrong): 4.24 print to tape messed up



    freundliche fragende Grüße vom ViennaLowLevelService ........... old Hans

    Zitat

    Es gibt keine blöden Fragen


    prinzipiell einverstanden.......


    aber es giebt unerwünschte Beitragstitel,
    a) wenn keinerlei Zuordnung daraus zu entnehmen ist; wie zB: "Hilfeeee" .... oder..."Neuling sucht Antwort" etc. .....und genau darunter fällt.... "blöde Frage!"


    b) wenn Alles in schreienden GROSSBUCHSTABEN geschrieben wird.


    in ernsthafteren Foren wird sowas gelöscht
    bzw. kommt Forum- Software zum Einsatz, die "caps look titles" automatisch unformatieren, um Admin-Zeit zu sparen.....



    freundliche Grüße vom ViennaLowLevelService ........... old Hans :huhu:

    @ Timo
    a) wie immer >> punktgenau [Blockierte Grafik: http://www.videotreffpunkt.com//images/smilies/smilygifs668.gif]
    b) habe >Resource Hacker™ - Version 3.4.0< verwendet, find ich recht komfortabel....


    @all
    Auslöser war allerdings PPro2.0, da dort leider immer zusätzlich vor dem Userdefinierten Sequenznamen
    überflüssigerweise jedesmal "Schnittfenster" links vom Doppelpunt reingeschrieben wird......i.e. 10 Sequenzen = 10x unötig "Schnittfenster: namexyz"


    ......jetzt halt nur mehr " :name xyz" .....[Blockierte Grafik: http://www.videotreffpunkt.com//images/smilies/54.gif]


    und da ich schon mal beim "rauskratzen" war, habe ich mir das leidige "Nur" oder "Nicht" UI-Problemchen halt auch gleich angeschaut......


    freundliche Grüße vom ViennaLowLevelService ........... old Hans :huhu:

    Servus Erich........mal wieder über was drübergestolpert..... :schal:



    Dein Bild:


    [Blockierte Grafik: http://666kb.com/i/aon4dvszxgt6oz4h2.jpg]



    just for fun........mein Stolper-Bild:


    [Blockierte Grafik: http://666kb.com/i/aon3w3afee2k6x2li.jpg]



    der "key" dazuliegt hier:


    [Blockierte Grafik: http://666kb.com/i/aon3viug1cqn8mzja.jpg]



    Zeitaufwand [für alten Deppen wie mich (der's erst probieren muß) ] 10min
    vermuteter Zeitaufwand für Edius Programmierer: 40sec.


    freundliche Grüße vom ViennaLowLevelService ........... old Hans :huhu:

    Servus @ all.......... drübergestolpert....... :schal:


    Die gute Nachrichicht: ... es tut sich was...... auch innerhalb der neuen Oberfläche.....



    Die Frage an die Grafik-Karten Gurus...... ab\seit wann haben die Karten volle >Direct3D< Unterstützung ???


    freundliche Grüße vom ViennaLowLevelService ........... old Hans :huhu: